What is a Class AB Loudspeaker Amplifier, and Why is it so Popular?
Dec 02,2025
● Designed based on ADAU1701 Sound Audio System. Use Sigma Studio DSP software to configure signal processing parameters.
● Selectable five customized preset modes that can be configured in software.
● The integrated DSP manages crossover, equalization, soft limiter, compressor, and dynamic bass boost.
● Analog Signal Input: Balanced XLR/TRS combo jack
● Analog Signal link out Balanced XLR
● Controls: Cluster, HF, High curving, Indoor
● CLUSTER: The switch gives possibilities of mid-low frequency correction depending on cluster size.
● HIGH CURVING: The switch gives the extra possibility to boost mid frequencies depending on a high curving cluster configuration of a few pieces.
● INDOOR: The switch gives the extra possibility to set low-frequency correction in order to compensate for room reverberation.
● Switching power supply: 600W ● Bass amplifier: Class D 400W-4 Ohm ● U-shaped aluminum radiator, st...
See Details
●Linear Transformer Power: 400W●Full Range Frequency Power Amplifier: CLASS H 400W-4ohm●U-shaped Alu...
See Details
● Designed based on ADAU1701 sound audio system. Use sigma studio DSP software to configure signal p...
See Details
● Designed based on ADAU1701 sound audio system. Use sigma studio DSP software to configure signal p...
See Details
● Analog signal input: 2*Balanced XLR jack Unbalanced RCA ● Analog signal output: 4*Balanced XLR Un...
See Details
● Analog signal input: 2*Balanced XLR/TRS comboUnbalanced RCA, stereo 3.5mm jack 2*Unbalanced TRS- m...
See Details
● Analog signal input: 2CH*Balanced XLR/TRS combo jack, stereo TRS or RCA, stereo 3.5mm jack ● Analo...
See Details
●LLC Resonant High Efficiency and High Reliability Switching Power Supply: 1800W●BTL Power Amplifier...
See Details
● Designed based on ADAU1701 Sound Audio System. Use Sigma Studio DSP software to configure signal p...
See Details
● LCD DSP control and monitoring interface● Single-knob control to enter the DSP menu and select the...
See DetailsFor almost every powered speaker project, a well-designed Class AB stage is the safer engineering and commercial choice. Class A only wins when measured linear...
Two quotations land on your desk for the same 2 x 500 W powered subwoofer board. The first is built around a Class AB stage with a heatsink roughly the size of...
A 100 W Class B amp sitting at idle draws almost nothing and barely warms its heatsink. Feed the same circuit into a 4 ohm speaker and run it at one watt, and ...
Put your hand on the back of a 500 W powered speaker after an hour of playback. A Class A or Class AB design is usually too hot to touch; a Class D amplifier i...
Which Class Amplifier Is Best for Sound Quality? The Short Answer A product team is finalizing a 12-inch two-way powered speaker. One prototype uses a 500 W Cl...
Founded In
Factory Area
Employee Count
Annual Output
Enterprise Advantages
Customization
We have a strong R & D team that can develop and produce products according to drawings or samples provided by customers.
Quality
We have more than 20 years of technical design precipitation, to give you high quality products.
Quality
Passed the ISO9001 international quality system certification, and established a systematic and standardized quality assurance system.
Service
"Serving customers is the eternal goal.
Phone
+86-18815298889
Tel
+86-574-87781767
Fax
+86-574-87787735
Add
Xiyun Road, Xiepu, Zhenhai, Ningbo, Zhejiang, China
